Tags |
|
|
Links |
|
|
Suggest You - Characteristics of Depreciation, Basic Factors of Determination of Depreciation
Big companies, or small, both have benefits and disadvantages. Big company may give you a false sense of security. In large companies when they have layoffs, seem to layoff large groups, not just one or two people.The advantage of a big company is you can get lost in the crowd. You do your work, and then you are able to come home and that is it. Then on the other hand a disadvantage, is that being lost in the crowd, you will not get recognition if you are doing a job well done. In most cases the congratulations go through many mouths before ever getting to you and then is never said, usually people forget to thank a whole line of people when they are all directly involved in a project. Most go unnoticed!An advantage to a small company is that you are noticed, but in that it’s a double edged sword, if you do well, or bad, they see it all. You may prefer to be your own boss and work in a small company where too you do your work and then go home. However these days working in a small company can require a lot of overtime, most without pay, due to staff reductions and layoffs.In searching for a company to work for know what you want ahead of time. Do not be afraid to ask how many people they have on staff. In this, you will be able to decide if the number is too large, that maybe you want a smaller company to work
The cost of natural resources is the price paid for its acquisition plus price paid for development of such asset in order to bring it to a state suitable for production.
The periodic depletion is better not calculated in terms of year. Rather it is better to calculate the cost per unit and then multiply the cost of unit to units produced in that particular year.
Machine Hour Rate
Under this method, the total number of working hours of a machine during the whole of its effective life is estimated, and then the cost of machine is divided by the expected number of hours of useful life, this gives the rate per hour. The annual depreciation is calculatedly multiplying this rate by the number of hours, the machine actually runs in a year.
Mileage Method
This method is used only for those assets whose useful life depends upon the fact that how many kilometers they have been driven e.g. buses, cars, trucks and rolling stock etc.
Global Method
Under this method, the value of the assets, irrespective of their nature is added together and depreciation is charged at an average rate on aggregated value.
Choice of a Method
Aforesaid methods of depreciation reveal that none is absolutely best or worst as each method has its own merits and demerits. Suitability of every method is relative and depends upon various factors. Most important of these are the type of the asset and purpose of depreciation. Straight line method suits to buildings and lease etc.. reducing installment method fits to machinery equipment etc. and depletion method for wasting assets like mines. quarries etc. However, the underly
Why take meeting minutes when meetings last hours? Usually poor business meeting etiquette is to blame, with poor planning and facilitation squandering valuable time and energy. Use these 7 business meeting etiquette tips to brush up your meeting skills and be more productive.1. Dinner jacket or Dinner on your jacketFirst decide on how formal your meeting will be. Advance warn attendees about special requirements, for example dress code, to ensure people understand what’s expected and can prepare accordingly.2. Too many chiefs ….. and not enough Native Americans ;>)There is a skill in inviting the right people to a meeting. Only invite bosses, and the work will never be done, so make sure you invite the right mix of decision makers, experts, implementers and stakeholders to enable post meeting action.3. …. But too many cooks spoil the brothThe flip side to inviting the right mix of people is that you may end up with an overflowing meeting room. As long as you get about 80% of who you need, you’re doing well.4. The 37 minute meeting agendaPrepare a meeting agenda in advance and circulate this to your attendees - remember that meetings can come in all different durations, so get people’s attention by having weird duration meetings. Meetings that start and finish on time (or even ear
Depreciation has the following characteristics:
(1) Depreciation is charged in case of fixed assets only, e.g., Building, Plant and Machinery, Furniture 'etc. There is no question of depreciation in case of current assets-such as Stock, Debtors, Bills Receivable etc.
(2) Depreciation causes perpetual, gradual and continuous fall in the value of asset
(3) Depreciation occurs till the last day of the estimated working life of asset
(4) Depreciation occurs on account of use of asset In certain cases, however, depreciation may occur even if the assets are not used, e.g., Leasehold Property, Patent right, Copyright etc.
(5) Depreciation is a charge against revenue of an accounting period.
(6) Depreciation does not depend on fluctuations in market value of asset
(7) The amount of depreciation of an accounting year cannot be determined precisely-it has to be estimated. In certain cases, however, it may be ascertained exactly, e.g., Leasehold Property, Patent Right, Copyright etc.
(8) Total depreciation of an asset cannot exceed its depreciable value (cost less scrap value).
Basic factors of determination of depreciation
(1) original cost of fixed asset i.e., purchase price plus freight and installation expenses;
(2) estimated amount of expenditure on repairs during the useful life;
(3) estimated useful life of asset after which it will be discarded;
(4) estimated residual or scrap value;
(5) interest on investment-the amount invested on purchase of asset, if it had been invested in some other investment what interest would have been earned;
(6) possibility of obsolescence.
Fixed Installment or Original Cost or Straight Line Method, reducing/Diminishing Balance method
Under this method depreciation is not calculated on cost of asset. It is computed on the book value. of asset. The book value of the asset is obtained by deducting depreciation from its cost. The book value of asset gradually reduces on account of depreciation charge. Since the depreciation percent rate is applied on reducing balance of asset. this method is called reducing balance or diminishing installment method or written down value method.
Merits and demerits.
Declining balance method not only equitably matches depreciation expenses against the related revenue but also fairly spreads. the incidence of depreciation and repairs (viz higher depreciation but heavier repairs in later years.) on profit and loss account over the assets life span. Elimination of major portion of cost in early years also minimizes the impact of obsolescence. It is equally useful to management as accelerated depreciation means smaller taxable profits and taxes hence lesser outflow of cash.
Accelerated Depreciation Methods
Sum-of-the year's digits (SYD). This method of depreciation accelerates depreciation expenses so that the amount recognized in the earlier periods of an asset's useful life are greater than those recognized in the latter periods. The SYD is found by estimating an asset's useful life in years, then assigning consecutive numbers to each year, and totaling these numbers. For n years, SYD = 1 + 2 + 3 + 4 + ... +n
Annuity Method
The method recognizes the time value (Interest) of money and hence regards the real cost of using a long-lived asset equivalent to the actual amount invested thereon plus the interest lost on the acquisition of asset. Under this method, so much depreciation is written off each year as after debiting the asset account with interest upon the diminishing value, will reduce the asset to nil at the end of its life. Thus, the amount written off as depreciation is the same every year, but the interest will diminish each year.
The amount of annual depreciation to be written off by Annuity method will be ascertained from Annuity Tables
Depreciation Fund method or Sinking Fund method
Under this method, a fixed amount is charged as depreciation every year. It endeavors to provide the required lump sum cash at the retirement of a long, lived asset by annually setting aside and investing a fixed sum in readily realizable securities. These securities earn interest at fixed rate and the same being reinvested along with successive fixed installments of depreciation, allowed to accumulate at compound interest. The sinking fund method thus takes into account of this probable income from interest while fixing the annual depreciation and investing the same which together with compound interest accumulated to the asset's depreciable cost by the end of its useful life. Obviously, the fixed installment of annual depreciation is here smaller as compared to straight line method. Its magnitude, however, rests on the asset's life span and interest rate. Longer the span and higher the rate, smaller is the annual depreciation per rupee of depreciable cost.
Shortcomings of Depreciation Fund Method
Depreciation fund method assumes constant rate of return on every periodic investment in identical securities. This is hardly true in this dynamic world where rates do vary now and then. Any variation in the rate of return upsets the earlier periodic allocation for depreciation and entails refection thereof. Further the amount realized on the sale of security rarely agrees with its acquisition cost owing to made fluctuations which may be both erratic and considerable. Those may cause a wide gap between the required and supplied cash.
Insurance Policy Method
This method endeavors the supply of required cash at the retirement of a specified asset in return of periodic contribution (premium). Under this a trader takes a 'Capital Redemption Insurance Policy' from an insurance company which undertakes to pay at a given date a certain sum if the trader, paying a fixed number of premiums after regular intervals. The trader treats the periodic payment as depreciation and charges it to profit and loss account. In this case, depreciation is charged at the end of the year, whereas, the premium is paid at the beginning of the year. At maturity, the insurance company pays the policy money which is normally sufficient to replace the retired set. Normally, amount received is more than total premium paid as the policy yields interest.
Revaluation Method
Under the system, each year the asset is valued and the value is compared with that in the beginning of the year. The fall is treated as depreciation. Suppose if the value of the tools at the beginning of the year was Rs. 8,000, during the year tools worth Rs. 6,000 were purchased and at the end of the year, on valuation these amounted to Rs. 11,000. The amount of depreciation for the year will be : 8,000 + 6,000-11,000 = Rs. 3,000 . This method is useful for charging depreciation on livestock and loose tools.
Depletion Method
Natural resources include physical assets like mineral deposits, oil and gas resources and timber stands. These natural resources get exhausted by exploitation. In some cases, the reduction in physical deposits is offset by growth or development of additional deposits.
The cost of natural resources is the price paid for its acquisition plus price paid for development of such asset in order to bring it to a state suitable for production.
The periodic depletion is better not calculated in terms of year. Rather it is better to calculate the cost per unit and then multiply the cost of unit to units produced in that particular year.
Machine Hour Rate
Under this method, the total number of working hours of a machine during the whole of its effective life is estimated, and then the cost of machine is divided by the expected number of hours of useful life, this gives the rate per hour. The annual depreciation is calculatedly multiplying this rate by the number of hours, the machine actually runs in a year.
Mileage Method
This method is used only for those assets whose useful life depends upon the fact that how many kilometers they have been driven e.g. buses, cars, trucks and rolling stock etc.
Global Method
Under this method, the value of the assets, irrespective of their nature is added together and depreciation is charged at an average rate on aggregated value.
Choice of a Method
Aforesaid methods of depreciation reveal that none is absolutely best or worst as each method has its own merits and demerits. Suitability of every method is relative and depends upon various factors. Most important of these are the type of the asset and purpose of depreciation. Straight line method suits to buildings and lease etc.. reducing installment method fits to machinery equipment etc. and depletion method for wasting assets like mines. quarries etc. However, the underlyi
The two most over-used buzzwords in business of the last ten to fifteen years are “China's Coming” and “The internet will change everything”. Curiously, it's not very often that you hear both buzzwords used together - but why not ? Using the internet to do business with China has to be one of the smartest ideas around.First of all, China has some incredible advantages in terms of trade. It has easy access to raw materials and cheap labour. Its economic base is growing and there is very little that China can't produce. Secondly, it is a massive and growing market for all sorts of products and services and with an increasing taste for western brands. These facts alone make doing business with China a very interesting proposition, let alone the fact that your competitors are already thinking about how they can lower costs and/or expand sales by doing business with China.But there are a number of drawbacks to doing face to face business with Chinese companies. China is a long way from the West, with a different business culture and a limited number of English speakers. If you want to travel to China to do business, it can be quite an expensive and daunting proposition. You'll need a translator or interpreter and you'll need to put aside a large amount of time to get to know the markets and the country and the culture once you have
Under this method depreciation is not calculated on cost of asset. It is computed on the book value. of asset. The book value of the asset is obtained by deducting depreciation from its cost. The book value of asset gradually reduces on account of depreciation charge. Since the depreciation percent rate is applied on reducing balance of asset. this method is called reducing balance or diminishing installment method or written down value method.
Merits and demerits.
Declining balance method not only equitably matches depreciation expenses against the related revenue but also fairly spreads. the incidence of depreciation and repairs (viz higher depreciation but heavier repairs in later years.) on profit and loss account over the assets life span. Elimination of major portion of cost in early years also minimizes the impact of obsolescence. It is equally useful to management as accelerated depreciation means smaller taxable profits and taxes hence lesser outflow of cash.
Accelerated Depreciation Methods
Sum-of-the year's digits (SYD). This method of depreciation accelerates depreciation expenses so that the amount recognized in the earlier periods of an asset's useful life are greater than those recognized in the latter periods. The SYD is found by estimating an asset's useful life in years, then assigning consecutive numbers to each year, and totaling these numbers. For n years, SYD = 1 + 2 + 3 + 4 + ... +n
Annuity Method
The method recognizes the time value (Interest) of money and hence regards the real cost of using a long-lived asset equivalent to the actual amount invested thereon plus the interest lost on the acquisition of asset. Under this method, so much depreciation is written off each year as after debiting the asset account with interest upon the diminishing value, will reduce the asset to nil at the end of its life. Thus, the amount written off as depreciation is the same every year, but the interest will diminish each year.
The amount of annual depreciation to be written off by Annuity method will be ascertained from Annuity Tables
Depreciation Fund method or Sinking Fund method
Under this method, a fixed amount is charged as depreciation every year. It endeavors to provide the required lump sum cash at the retirement of a long, lived asset by annually setting aside and investing a fixed sum in readily realizable securities. These securities earn interest at fixed rate and the same being reinvested along with successive fixed installments of depreciation, allowed to accumulate at compound interest. The sinking fund method thus takes into account of this probable income from interest while fixing the annual depreciation and investing the same which together with compound interest accumulated to the asset's depreciable cost by the end of its useful life. Obviously, the fixed installment of annual depreciation is here smaller as compared to straight line method. Its magnitude, however, rests on the asset's life span and interest rate. Longer the span and higher the rate, smaller is the annual depreciation per rupee of depreciable cost.
Shortcomings of Depreciation Fund Method
Depreciation fund method assumes constant rate of return on every periodic investment in identical securities. This is hardly true in this dynamic world where rates do vary now and then. Any variation in the rate of return upsets the earlier periodic allocation for depreciation and entails refection thereof. Further the amount realized on the sale of security rarely agrees with its acquisition cost owing to made fluctuations which may be both erratic and considerable. Those may cause a wide gap between the required and supplied cash.
Insurance Policy Method
This method endeavors the supply of required cash at the retirement of a specified asset in return of periodic contribution (premium). Under this a trader takes a 'Capital Redemption Insurance Policy' from an insurance company which undertakes to pay at a given date a certain sum if the trader, paying a fixed number of premiums after regular intervals. The trader treats the periodic payment as depreciation and charges it to profit and loss account. In this case, depreciation is charged at the end of the year, whereas, the premium is paid at the beginning of the year. At maturity, the insurance company pays the policy money which is normally sufficient to replace the retired set. Normally, amount received is more than total premium paid as the policy yields interest.
Revaluation Method
Under the system, each year the asset is valued and the value is compared with that in the beginning of the year. The fall is treated as depreciation. Suppose if the value of the tools at the beginning of the year was Rs. 8,000, during the year tools worth Rs. 6,000 were purchased and at the end of the year, on valuation these amounted to Rs. 11,000. The amount of depreciation for the year will be : 8,000 + 6,000-11,000 = Rs. 3,000 . This method is useful for charging depreciation on livestock and loose tools.
Depletion Method
Natural resources include physical assets like mineral deposits, oil and gas resources and timber stands. These natural resources get exhausted by exploitation. In some cases, the reduction in physical deposits is offset by growth or development of additional deposits.
The cost of natural resources is the price paid for its acquisition plus price paid for development of such asset in order to bring it to a state suitable for production.
The periodic depletion is better not calculated in terms of year. Rather it is better to calculate the cost per unit and then multiply the cost of unit to units produced in that particular year.
Machine Hour Rate
Under this method, the total number of working hours of a machine during the whole of its effective life is estimated, and then the cost of machine is divided by the expected number of hours of useful life, this gives the rate per hour. The annual depreciation is calculatedly multiplying this rate by the number of hours, the machine actually runs in a year.
Mileage Method
This method is used only for those assets whose useful life depends upon the fact that how many kilometers they have been driven e.g. buses, cars, trucks and rolling stock etc.
Global Method
Under this method, the value of the assets, irrespective of their nature is added together and depreciation is charged at an average rate on aggregated value.
Choice of a Method
Aforesaid methods of depreciation reveal that none is absolutely best or worst as each method has its own merits and demerits. Suitability of every method is relative and depends upon various factors. Most important of these are the type of the asset and purpose of depreciation. Straight line method suits to buildings and lease etc.. reducing installment method fits to machinery equipment etc. and depletion method for wasting assets like mines. quarries etc. However, the underly
1. Merchant Accounts: What are the Visa, MasterCard & Amex Discount Rates?- Every Payment Processing Provider will have this fee. Discount rates can vary on from as low as 1.59% right up to as high as 5.0%. The Discount Rate is really not a discount. It is a % of your sales that the Credit Card Companies charges the Business Owner to be able to offer their customers to pay with their Credit Card. (Example: If you did $10,000 in Visa sales in one month and your Discount rate was 2.5% then you would pay $250 in fees to Visa that month.) - Rates vary and are dependent on your Business Model, Business Volume, Average Sale per Customer, Type of Product & Service your business offers, the way you process payments for your products & services: online, telephone, mail-order, or in-store all affect the Discount Rate your business will qualify for. - Usually High-Risk Business will have higher rates. Businesses that have higher ticket prices, Businesses that process payments via: E-commerce, Telephone (IVR), & Mail-order usually fall under the High-Risk Umbrella.2. Are ‘keyed in’ Visa, MasterCard & Amex Discount Rates at a different rate then swiped?- Most Payment Processing Providers will have a different Discount Rate for transactions that are keyed in on POS Terminal instead of being swiped across the POS Termin
The amount of annual depreciation to be written off by Annuity method will be ascertained from Annuity Tables
Depreciation Fund method or Sinking Fund method
Under this method, a fixed amount is charged as depreciation every year. It endeavors to provide the required lump sum cash at the retirement of a long, lived asset by annually setting aside and investing a fixed sum in readily realizable securities. These securities earn interest at fixed rate and the same being reinvested along with successive fixed installments of depreciation, allowed to accumulate at compound interest. The sinking fund method thus takes into account of this probable income from interest while fixing the annual depreciation and investing the same which together with compound interest accumulated to the asset's depreciable cost by the end of its useful life. Obviously, the fixed installment of annual depreciation is here smaller as compared to straight line method. Its magnitude, however, rests on the asset's life span and interest rate. Longer the span and higher the rate, smaller is the annual depreciation per rupee of depreciable cost.
Shortcomings of Depreciation Fund Method
Depreciation fund method assumes constant rate of return on every periodic investment in identical securities. This is hardly true in this dynamic world where rates do vary now and then. Any variation in the rate of return upsets the earlier periodic allocation for depreciation and entails refection thereof. Further the amount realized on the sale of security rarely agrees with its acquisition cost owing to made fluctuations which may be both erratic and considerable. Those may cause a wide gap between the required and supplied cash.
Insurance Policy Method
This method endeavors the supply of required cash at the retirement of a specified asset in return of periodic contribution (premium). Under this a trader takes a 'Capital Redemption Insurance Policy' from an insurance company which undertakes to pay at a given date a certain sum if the trader, paying a fixed number of premiums after regular intervals. The trader treats the periodic payment as depreciation and charges it to profit and loss account. In this case, depreciation is charged at the end of the year, whereas, the premium is paid at the beginning of the year. At maturity, the insurance company pays the policy money which is normally sufficient to replace the retired set. Normally, amount received is more than total premium paid as the policy yields interest.
Revaluation Method
Under the system, each year the asset is valued and the value is compared with that in the beginning of the year. The fall is treated as depreciation. Suppose if the value of the tools at the beginning of the year was Rs. 8,000, during the year tools worth Rs. 6,000 were purchased and at the end of the year, on valuation these amounted to Rs. 11,000. The amount of depreciation for the year will be : 8,000 + 6,000-11,000 = Rs. 3,000 . This method is useful for charging depreciation on livestock and loose tools.
Depletion Method
Natural resources include physical assets like mineral deposits, oil and gas resources and timber stands. These natural resources get exhausted by exploitation. In some cases, the reduction in physical deposits is offset by growth or development of additional deposits.
The cost of natural resources is the price paid for its acquisition plus price paid for development of such asset in order to bring it to a state suitable for production.
The periodic depletion is better not calculated in terms of year. Rather it is better to calculate the cost per unit and then multiply the cost of unit to units produced in that particular year.
Machine Hour Rate
Under this method, the total number of working hours of a machine during the whole of its effective life is estimated, and then the cost of machine is divided by the expected number of hours of useful life, this gives the rate per hour. The annual depreciation is calculatedly multiplying this rate by the number of hours, the machine actually runs in a year.
Mileage Method
This method is used only for those assets whose useful life depends upon the fact that how many kilometers they have been driven e.g. buses, cars, trucks and rolling stock etc.
Global Method
Under this method, the value of the assets, irrespective of their nature is added together and depreciation is charged at an average rate on aggregated value.
Choice of a Method
Aforesaid methods of depreciation reveal that none is absolutely best or worst as each method has its own merits and demerits. Suitability of every method is relative and depends upon various factors. Most important of these are the type of the asset and purpose of depreciation. Straight line method suits to buildings and lease etc.. reducing installment method fits to machinery equipment etc. and depletion method for wasting assets like mines. quarries etc. However, the underly
Forex? What is it, anyway?The marketThe currency trading (FOREX) market is the biggest and fastest growing market on earth. Its daily turnover is more than 2.5 trillion dollars. The participants in this market are banks, organizations, investors and private individuals, just like you. (click here to read full market background by Easy-Forex™).The goods (merchandise)Markets are places to trade goods, and the same goes with FOREX. The Forex goods are the currencies of various countries. You buy Euro, paying with US dollars, or you sell Japanese Yens for Canadian dollars. That's all.How does one profit in Forex?Obviously, buy cheap and sell for more! The profit potential comes from the fluctuations (changes) in the currency exchange market. The nice thing about the FOREX market, is that regular daily fluctuations, say - around 1%, are multiplied by 100! (in general, Easy-Forex™ offers trading ratios from 1:50 to 1:200).How risky is Forex trading?You cannot lose more than your "margin" (your initial investment)! You may profit unlimited amounts, but you never lose more than what you initially risked. However, risk only what you can afford and is not vital for your well-being.How do I start trading?Register (Easy-Forex™ offers the simplest and quickest registration process, no
Insurance Policy Method
This method endeavors the supply of required cash at the retirement of a specified asset in return of periodic contribution (premium). Under this a trader takes a 'Capital Redemption Insurance Policy' from an insurance company which undertakes to pay at a given date a certain sum if the trader, paying a fixed number of premiums after regular intervals. The trader treats the periodic payment as depreciation and charges it to profit and loss account. In this case, depreciation is charged at the end of the year, whereas, the premium is paid at the beginning of the year. At maturity, the insurance company pays the policy money which is normally sufficient to replace the retired set. Normally, amount received is more than total premium paid as the policy yields interest.
Revaluation Method
Under the system, each year the asset is valued and the value is compared with that in the beginning of the year. The fall is treated as depreciation. Suppose if the value of the tools at the beginning of the year was Rs. 8,000, during the year tools worth Rs. 6,000 were purchased and at the end of the year, on valuation these amounted to Rs. 11,000. The amount of depreciation for the year will be : 8,000 + 6,000-11,000 = Rs. 3,000 . This method is useful for charging depreciation on livestock and loose tools.
Depletion Method
Natural resources include physical assets like mineral deposits, oil and gas resources and timber stands. These natural resources get exhausted by exploitation. In some cases, the reduction in physical deposits is offset by growth or development of additional deposits.
The cost of natural resources is the price paid for its acquisition plus price paid for development of such asset in order to bring it to a state suitable for production.
The periodic depletion is better not calculated in terms of year. Rather it is better to calculate the cost per unit and then multiply the cost of unit to units produced in that particular year.
Machine Hour Rate
Under this method, the total number of working hours of a machine during the whole of its effective life is estimated, and then the cost of machine is divided by the expected number of hours of useful life, this gives the rate per hour. The annual depreciation is calculatedly multiplying this rate by the number of hours, the machine actually runs in a year.
Mileage Method
This method is used only for those assets whose useful life depends upon the fact that how many kilometers they have been driven e.g. buses, cars, trucks and rolling stock etc.
Global Method
Under this method, the value of the assets, irrespective of their nature is added together and depreciation is charged at an average rate on aggregated value.
Choice of a Method
Aforesaid methods of depreciation reveal that none is absolutely best or worst as each method has its own merits and demerits. Suitability of every method is relative and depends upon various factors. Most important of these are the type of the asset and purpose of depreciation. Straight line method suits to buildings and lease etc.. reducing installment method fits to machinery equipment etc. and depletion method for wasting assets like mines. quarries etc. However, the underly
I have a friend who is caught up in some serious 'paralysis of analysis' where her business life is concerned. I advised her to simply follow God's peace and just get moving! She looked at me like I had suggested that she jump off a cliff. I could tell that she was literally frozen by her own fear of missing God.Missing God is just not something that I've ever worried about. What do people mean when they say 'I'm afraid of missing God?" anyways? It is as though they believe that God has set up a maze for them to figure out and if they go the wrong way - they've blown it and will be stuck in some dead end.I don't believe for a minute that God is like that.God created you with unique talents and motivations. He put you together in a way that you would enjoy doing some things more than others. I believe that what you enjoy doing will give you a large clue about what you are called to do - whether that is in ministry, business or even a hobby.We should be following our heart's desire when it comes to choosing a business. It should fit us like a glove and cause us to stretch and grow in our skills and our personal relationship with God. (As a business grows, our reliance on God for every decision will grow too!)My friend told me that she fears that she can't tell what part of her desire is 'just her' and what pa
The cost of natural resources is the price paid for its acquisition plus price paid for development of such asset in order to bring it to a state suitable for production.
The periodic depletion is better not calculated in terms of year. Rather it is better to calculate the cost per unit and then multiply the cost of unit to units produced in that particular year.
Machine Hour Rate
Under this method, the total number of working hours of a machine during the whole of its effective life is estimated, and then the cost of machine is divided by the expected number of hours of useful life, this gives the rate per hour. The annual depreciation is calculatedly multiplying this rate by the number of hours, the machine actually runs in a year.
Mileage Method
This method is used only for those assets whose useful life depends upon the fact that how many kilometers they have been driven e.g. buses, cars, trucks and rolling stock etc.
Global Method
Under this method, the value of the assets, irrespective of their nature is added together and depreciation is charged at an average rate on aggregated value.
Choice of a Method
Aforesaid methods of depreciation reveal that none is absolutely best or worst as each method has its own merits and demerits. Suitability of every method is relative and depends upon various factors. Most important of these are the type of the asset and purpose of depreciation. Straight line method suits to buildings and lease etc.. reducing installment method fits to machinery equipment etc. and depletion method for wasting assets like mines. quarries etc. However, the underlying purpose is the basic determinants of the propriety of a depreciation method. Important purpose comprise of true reporting of accounts, tax benefits, comparative product cost, financial flexibility, replacement and expansion etc. For example. depreciation fund method envisages that the amount set aside for depreciation is to be invested outside the business in specific securities. Similarly under insurance policy method, the amount so set aside is handed over to insurance company. If a business is having working capital problems the advisability of these methods is questionable.
Of the above-mentioned methods (1) Fixed Installment and (2) Reducing Installment methods are most widely used.
Distinction between Fixed Installment Method and Reducing Installment Method
Fixed Installment Method
1. The rate and amount of depreciation remain the same each year.
2. Depreciation rate per cent is calculated on cost of asset each year.
3. At the end of its life the value of asset is reduced to zero or scrap value.
4. The older the asset, the larger the cost of its repairs. But the amount of depreciation remains the same each year. Hence, the total of depreciation and repairs increases every year. This reduces annual profit gradually.
5. Computation of depreciation comparatively easy and simple.
Reducing Installment Method
1. The rate remains the same, but the amount of depreciation diminishes gradually.
2. Depreciation rate percent is calculated on book value of asset.
3. The value of asset is never reduced to zero at the end of its life.
4. The amount of depreciation decreases gradually, while the cost of repairs increases. So the total of depreciation and repairs remains more or less the same each "year. Hence, it causes little or no change in annual profit/loss.
5. Depreciation can be computed without any difficulty, but it is not so easy and simple.
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.suggestyou.com/article/5269/suggestyou-Characteristics-of-Depreciation-Basic-Factors-of-Determination-of-Depreciation.html">Characteristics of Depreciation, Basic Factors of Determination of Depreciation</a>
BB link (for phorums):
[url=http://www.suggestyou.com/article/5269/suggestyou-Characteristics-of-Depreciation-Basic-Factors-of-Determination-of-Depreciation.html]Characteristics of Depreciation, Basic Factors of Determination of Depreciation[/url]
Related Articles:
Business Brokers and Valuations, a Comment
Bookmark it:
|